VENEER edge gluing with gravity

Heres the start of the much anticipated VENEER series.

I have many tricks for dealing with veneer issues before painting furniture.

With vintage furniture, veneer refers to thin slices of quality wood, usually

thinner than 1/8 inch, that are glued onto panels of a lesser grade woods.

Veneering is an ancient art, dating back to the Egyptians who

used veneers on their furniture and sarcophagi.

The first step in any DIY veneer repair is to establish how bad the damage is

and what route to take. I will go over edge gluing this time and eventually

share how to glue bubbles, fill missing areas, and the dreaded removal of veneer.

It is actually very simple but youll just have to wait and see.

Many pieces of vintage veneered furniture have some edge lifting,

usually along the bottom.

Its a simple matter of using wood glue to secure the veneer back into place

and using masking tape to hold it down while it dries.

Use gravity!

Turn your piece of furniture over to get the glue run down in behind the lifting veneer.

I use a wet sponge to clean up any access glue before taping the edges.

Lay your tape on the veneered surface first and pull it tight over the edge.

Your drying time will vary with climate and temperture,

but a decent wait time would be 4 hours under normal circumstances.

Now go forth and Do it Yourself!

Related Posts by Categories