DIY Table Top Photo Studio Plans

Every so often I try to get rid of things I dont need any more by selling them on Ebay or Craigslist. Ive found that having good photos helps items sell faster and get better prices so I made this little table top light box to take better product photos. It was made mostly of things I had lying around. Here are plans to build one yourself.

Understanding Shadows

Nothing screams out amateur quality photo more than dark harsh shadows. Lighter, softer shadows make product photos more pleasing and give a more accurate depiction.
There are three main parts of a shadow. The umbra, penumbra and antumbra. The umbra is the darkest part of the shadow where all light is obstructed by the object. The penumbra and antumbra are lighter, softer portions of the shadow where some light gets through.
When you use a small light source, like the itty-bitty flash thats built into your camera, the shadow is mostly umbra.

If your light source is large, in relation to the object youre photographing, the umbra becomes smaller and there is a sizable penumbra.

Please excuse the crude diagrams, it should be clearer once you see the sample photos.
The way the light box works is by making your light source effectively larger so you get softer, more pleasing shadows. In addition, all the light bouncing around helps make the shadows lighter and provides more even illumination.
Heres an example. There are more examples at the end of this post.

DIY Light Box with One light on left

For comparison lets look at the same light under different lighting using the same white poster board background. First using the cameras built-in pop-up flash, then using incandescent room lights (ceiling) after white balancing.

On Camera Flash

If you dont want to make your own there are a number of different Table Top Studios

2 Sheets of 22" x 28" White Poster Board (10 pack about $6.50 from Staples)

10 small Binder Clips

Glue Stick or Spray Adhesive

Packaging Tape

Diffusion material (see steps for details)

Tools

• Utility Knife
• Scissors
• Straight Edge
• Pencil
• Tape Measure

Cut Plan

You can use either a thick package type cardboard to make the light box or foam core. To standardize things a bit Im using 22" x 28" of foam board for these plans. I was in the middle of recycling when I made mine and wound up using cardboard.
My local Staples didnt carry 22x28 foam board except for the tri-fold presentation boards which arent the best choice for this. You might be able to find that size at an art supply store or you can get it online from Amazon.
Here is how well cut the foam core. If youre using cardboard, cut the relevant shapes out of whatever you have. Sizing isnt all that critical except for the 22" width and the 14" depth. I just eyeballed most of it.

Step 1: Back and Bottom

Take one sheet of 22x28" foam core and score it down the middle (14") so that you can bend it at a 90 degree angle. If youre using cardboard cut 2 14" x 22" pieces and tape them together along the 22" side to form an L like shown.

Step 2: Cut Out Sides

The sides are 14" x 14 3/16". The 3/16" comes from using 3/16" thick foam core. Ideally the sides would be 14 3/16" x 14 3/16" but its such a small difference its not worth buying another sheet of foam core for.
After you cut the 2 sides, measure and mark a square about 1-1/2" in from all 4 edges and cut it out with a utility knife. Keep this inner portion to use as a reflector later.

Step 3: Apply Diffusion Material To Sides

To make the light effectively larger we need to diffuse it. The standard is to use a white ripstop nylon fabric

Step 4: Attach Sides and Top Support

Cut out a 2" or so strip of foam core or cardboard that is 22" long + 2 times the thickness of the foam core (or cardboard). Attach the sides (with the diffusion material on the inside of the box) and the top support as shown using packing tape.

Step 5: Insert Poster Board

The main background of this light box is going to be a 22" x 28" sheet of white poster board. Slide it into the box (shiny side up), leaving a soft curve in the corner and attach it to the back and bottom with the binder clips. The binder clips make it easy to change the background if it gets damaged or to change the color.

The bottom front of the poster board will hang a little outside the box but thats okay.

Step 6: Attach Top Diffuser

Cut and attach more of your light diffusing material for the top of your box and attach it with binder clips. I removed the binder clips holding the poster board one by one to attach the top diffuser to the back. Make sure the diffuser passes under the top support, especially if youre using brown cardboard for the frame.
The diffuser is blue in the illustration for clarity.

Step 7: Reflectors

To help bounce more light to the front of the object being photographed were going to make some reflectors out of the left over foam core and the inner sections we cut out of the sides. If youre using cardboard, make sure to cover one side with poster board cut to size. You can also cover the back side in a black material to act as a light block if you wish.
To keep the reflectors standing up on their own well make 4 feet. Two for each reflector in use.
Cut out 2" high pieces of foam core from the section shown in the cut plan and make a notch in each to slide the reflector in. The width of the notch will depend on the thickness of the material youre using. I was able to just eyeball these cuts. They dont have to be that precise.

To use the reflectors, just slide 2 feet on to the bottom to make it stand upright.

Using Your Light Tent

Now youll need some lighting to be able to take good photos. This doesnt have to be that complicated as the light box will make most kinds of lights look better.
You can use 1, 2, 3 or more lights with your light tent. One on one side, one on each side, one or two on the top, one on each side and also one or two on the top. Different configurations will give you different results. Just make sure you keep the light about 8-12" away from the diffuser.

Play around with adjusting the lights and reflectors to get different effects. Here are some examples.

Here are some more photos I took of different objects I had lying around after I finished construction of my homemade light tent.
?

Standard Ceiling Light

?

One Light Left

?

One Light Above with Glossy Background

?

One Light Left

?

One Light Left

?

One Light Top

One Light Left

Read More..

Another Custom Staining Decorative Top

Ive been somewhat lax in keeping my blog updated. Not because I havent been doing anything but rather Ive been doing too many things! Does anyone else start on one project, see something else that looks cool, start on that, only to get sidelined by, yep you guessed it, something else!

 I think I have furniture repurposing ADD. I have so many projects going on, that it seems like Im just spinning in circles. Im even making Vertical Succulent Gardens from old cabinet doors! 

(But thats another post!!)

So lets just try to stay on this track.......

This is my 3rd or 4th "painting with stain"  top that Ive done. 

To see the first one with some how-tos, visit this post. 

I picked up this mid century solid mahogany piece off of CL (where else??) And while it did have a few issues, it was nothing that wood glue, clamps and some sanding couldnt fix.

Dont be afraid to grab pieces that look like this. You can usually get them at quite a discount and they are pretty easy to fix. If you are going to stain the wood, then use a stripper to get off the old finish. 

If you just plan on painting, you can use your sander. 

              The drawer fronts looked just as bad as the top but look how nicely they sanded up. The mahogany veneer was peeling back in spots but were easily fixed.

So for this top, I drew out my flowers using a piece of chalk. If you dont like it, it wipes off with water. I played around with all different shades of stains, mixing as I went along. 

 The background behind the petals was done in golden pecan. Everything else was darker or lighter. I tried to keep the chalk lines delineating the petals free from any stain. I took a small brush and used a bit of gold gilding wax to trace along. 

           I could not decide for the life of me, which color to paint this.  If you look at the 2nd pic above, youll see where I painted the drawers in milk paint in some sort of green or gray shade. Didnt like. 

So I mixed up some off-white and made my own chalk paint. The front is just so plain but I didnt want anything competing with the top because then it would look too busy. Painting the accent rails in a teal blue (MS "Plumage") added just enough. 

 I also found these cool drawer pulls made from sliced agate in a teal blue.
 Im waiting for two more before I put them on. 

What do you think?? Pulls or no pulls??

I have four of the pulls, still awaiting the last two I ordered. 

I did a wipe-on poly over the white, then went over it with wax. Dont ask me why I

make more work for myself. The top was a wipe-on urethane from General Finishes. 

Linking up at my fave parties!! :

Kammys Korner - Trash to Treasure Tuesdays

Domestically Speaking - The Power of Paint Party

Stacey Embracing Change - Thursday 

Miss Mustardseed - Furniture Feature Friday

Redoux - Friday Link Up Party

Funky Junk Interiors - Saturday Night Special

Knick of Time Interiors - Knick of Time Tuesday

Tuesday-Elizabeth and Co., My uncommon Slice of Suburbia,

Savvy Southern Style. Weds, Beyond the Picket Fence, PJH Designs

From my Front Porch to Yours,  The 36th Avenue,

Monday-Between Naps on the Porch, The Dedicated House,

My RePurposed Life, No Minimalist Here-Thurs.    Under the Table and Dreaming-Sunday Party

Remodelaholic,  MinettesMaze-Sun party

 

Home Stories A To Z	Today’s Creative Blog
Tip Junkie	Nifty Thrifty Tuesday	Pink When
Thrifty Decor Chick
	The Scoop
From My Front Porch To Yours
The Brambleberry Cottage	No Minimalist Here	The Shabby Creek Cottage
Redoux Interiors	The 36th Avenue
Jennifer Rizzo	Miss Mustard Seed
Funky Junk Interiors	Tatertots & Jello
Be Different Act Normal
The DIY Showoff	Nifty Thrifty Things

Read More..